TP-Link Router Orange Light : What It Means & How To Fix It [2024 Guide]

The orange light on the TP-Link router means that the router is trying to establish an internet connection, meaning there is no internet connection.

TP-Link, a prominent manufacturer of routers and computer networking products, is widely recognized for the reliability of their offerings, which are utilized by millions of individuals worldwide. While their products may encounter occasional technical issues, these challenges can typically be resolved by users without requiring extensive technical knowledge or professional assistance.

A typical router incorporates LED lights that signify various states of the internet connection or the router itself. In this article, we will focus on the TP-Link orange light, delving into its significance and how to address any associated issues.

How To Fix TP-Link Router Orange Light?

Now that we understand the significance of the orange light on the TP-Link router, let’s proceed to resolving this issue. There can be several reasons why this light is flashing orange. Allow me to guide you through each solution to fix the TP-Link orange light problem.

1. Check Your ISP Internet Service Outage

If your TP-Link router is displaying a flashing orange light, it is advisable to contact your internet service provider to inquire about any potential internet service outage or ongoing maintenance. You can call them and inquire whether there is any scheduled maintenance or if there are any issues with the internet service in your area. In the event of such circumstances, the only course of action is to patiently wait for the restoration of the internet service.

2. Check The Loose or Damaged Cables & Connection

Please examine the cables for any signs of damage or cuts. Ensure that the cables are securely connected by tightening them if necessary. Disconnect the cable and inspect the connectors for any dust particles or moisture.

Additionally, examine the ports of the router for any dust particles or moisture. Clean the connectors of the cable and the router’s ports. Inspect the cable for any cuts or twists. If you come across any, it will be necessary to replace the cable.

3. Restart Your TP Link Router

One of the solutions to resolve the TP-Link orange light issue is to restart the router. Restarting the router often resolves many temporary bugs that may be affecting its functionality. Here are the steps to follow:

• Turn off the router.
• Wait for approximately one minute.
• Turn the router back on and patiently wait for it to boot up completely.

4. Power Cycle Your Router

Power cycling refers to the process of disconnecting a device from its power source and allowing it to rest. This action can help resolve certain issues such as bugs, configuration conflicts, and cached memory that may be stored on the router, potentially causing the internet connection to slow down or cease functioning altogether.

Steps to power cycle the router

• Disconnect the router and modem from their power sources.
• Also, disconnect the Ethernet cables.
• Wait for a few minutes, approximately 1 to 2 minutes.
• Reconnect the router and modem to their power sources.
• Allow the router to fully boot up.

By performing these steps, any potential problems caused by cache memory or configuration conflicts can be resolved.

5. Ensure Physical Obstructions Around Your Router

The orange light on your TP-Link router could be caused by an obstruction that leads to a slowdown or interruption of the internet connection. To address this, please follow these steps:

• Remove any objects that are placed near your router.
• Ensure that your router is positioned in an open area where no objects are in close proximity to it.
• Additionally, make sure to place your router away from other electrical objects.

After checking or relocating your router to an open area, restart the router and observe if the orange light continues to flash.

6. Check MAC Binding Problem

If you are using a cable internet service and experiencing issues with the TP-Link orange light, it could be due to MAC binding. Follow these steps to resolve the problem:

• Unplug both the power cable and coaxial cable from the modem.
• Reconnect the power cable to the modem, but do not reconnect the coaxial cable yet.
• Connect the modem to the router’s WAN port using an Ethernet cable.
• Turn on the modem.
• After approximately five minutes, reconnect the coaxial cable.

Wait for the modem to establish a connection to the internet. You can verify this by visiting a website.

7. Current Device’s MAC Address

To resolve the issue of the TP-Link orange light, you can try cloning the MAC address of your current device. Please ensure that your internet connection before proceeding.

Follow these steps to clone the current device:

• Log in to your TP-Link account.
• On the admin dashboard, navigate to “Advanced” in the menu.
• In the left-hand menu, click on “Network.”
• In the sub-menu, select “Internet.”
• Proceed to the “MAC Clone” section.
• Tick the “Use current computer MAC Address” radio button.
• Click the “Save” button.

Now, verify if the TP-Link router light is still displaying an orange color.

8. Update Router’s Firmware

Sometimes, internet connection problems can occur due to the outdated firmware. Updating the firmware is important as it includes improved security protocols, bug fixes, and enhanced functionality. While router firmware usually updates automatically, there are instances where manual firmware updates are required. To manually update the firmware, follow these steps:

• Download the appropriate firmware from TP-Link’s official website.
• Extract the downloaded firmware file on your computer.
• Access your TP-Link router’s settings by navigating to “Advanced” in the top horizontal menu.
• From the left-hand side, select “System tools.”
• Click on “Firmware Upgrade.”
• In the “New Firmware file” field, click on the “Browse” button.
• File Explorer will open. Locate and select the extracted firmware file.
• Click “Upgrade” to initiate the firmware update process.

Allow the firmware to upgrade. Once the update is complete, the router will reboot, and the orange light on your TP-Link router should no longer be present.

9. Factory Reset the Router

In cases where a simple restart or reboot does not resolve router issues, resetting the router to factory settings can often help. This action clears the router of any bugs or malware. However, please note that resetting the router also erases any custom configurations you have made, such as Wi-Fi name, password, firewalls, parental controls, and more. Therefore, after resetting the router to factory settings, you will need to reconfigure it.

To reset the router to factory settings, follow these steps:

• Locate the reset button at the back of the router.
• Use a paperclip or any sharp object.
• Press and hold the reset button.
• Release the button when you see the power LED light blink.
• Allow the router to boot up.

10. Contact the TP Link Support Team

If none of the aforementioned solutions, such as restarting, rebooting, and checking the cables, prove effective, the final course of action is to contact TP-Link’s support team. Their knowledgeable staff can provide further assistance and guidance. Be sure to inform them about all the attempted solutions you have already tried, enabling them to offer alternative approaches. In some cases, they might even arrange a visit to assess the hardware.

Frequently Asked Questions

Conclusion

Now that you are aware of the meaning of the TP-Link orange light and the corresponding solutions, you can address the issue without requiring any technical knowledge or expertise. These solutions are simple enough to perform at home by yourself.